|
Post by dtcomposer on Sept 10, 2010 5:56:16 GMT
I am running ASIO v. 2.10 on my Windows 7 computer. I recently bought some Behringer Truth monitors and am running them through the UCA 222 USB interface. Now when I try to use ASIO for sounds I get this quiet and persistent pulsating feedback. It is a high sound. I only get this feedback when using asio 4 all. If I run the sounds directly through the speakers using the codec, there is no feedback, but obviously performance suffers greatly. I have tried disabling the mic inputs, and other audio devices. I have checked the outlets and other possible feedback sources, and have found none. I am not that familiar with how ASIO works, so possibly there is some easy solution that I am missing?
Help would be much appreciated,
David
|
|
|
Post by Peter Aksberg on Jan 13, 2011 10:36:18 GMT
Problem with pulsating noise is NOT because of asio 4 all, it appears with Behringer ASIO drivers also.
Tried on several computers, UCA222 was "silent" until ASIO drivers were installed.
|
|
|
Post by d on Sept 18, 2012 10:14:07 GMT
turn off the monitor on the uca222 unit and it eliminates the pulse
|
|