|
|
Post by Dj Diabolik on Jan 21, 2005 19:08:21 GMT
I have installed under council l'asio4all v2.2 in order to use in contemporary the 2 my cards audio (a Sound Blaster and that one integrated Ac97) but strange what succeeds one to me: Creed to have set up well all but after a much time that I am using the program music oakum alone like if someone this removed the needle from a vinile.... after a lot of time and with both the cards audio..... hour I do not know if it is a problem of settings... if you can help me or give to me to some council.... thanks.
|
|
|
|
Post by Michael Tippach on Jan 21, 2005 21:28:07 GMT
If I understand you correctly, you are using two devices with ASIO4ALL simultaneously. For this to properly work, both devices need to be syncronized by a common clock source. Usually this can be achieved by linking both devices via S/PDIF, if available.
If there is no common clock source, the now slightly different clocks of both devices will drift apart and eventually cause the driver to re-sync, resulting in a short audio drop out.
|
|
|
|
Post by Dj Diabolik on Jan 22, 2005 3:54:04 GMT
mmmmmmm... the 2 cardo not have the Ouput S/Pdif..therefore currently I cannot use them like driver asio.. I have tried with driver the Direct3d.. but making it does not recognize me the card integrated on my motherboard...  |
|
