2.4 not working at all

[Typhonj]

Michael.

Just tryed 2.4 and the problem got worst.
Here is what I've found:
*Installed perfectly
*Tryed the off-line pannel, didn't showed up but showed onto
task manager
*Reboot, same thing
*Lunch Sonar, change driver for ASIO, restart Sonar, didn't work. Stop Sonar in task manager, erase AUD.ini
*Reboot, tryed Sonar again, still locking up
*Task manager, shutt down Sonar then uninstall 2.4
*Restart Sonar. . . Back to life!

To try to help, your 2.2 was working fine any other than the small stutering at the begining of mixed midi/audio file which was conducting in a timimng mismatch in between midi and audio plyback but I've never had Creative ASIO working either on my machine still coming back to me with device busy message.

I'm running XP sp2 on my Asus A7V8X-MX board running at 1.92gHz with 512megs/ram, two Maxtor 40gig on primary IDE and CDplayer and DVD RW on secondary IDE and an ATI9200 video and Audigy 2ZS using the digital coax port to my digital amp/receiver

Only 26 services are running on my machine almost everything is either turned off or 'as required' any other than Ethernet and essential MS services (Trying to give as much resources as I can to my Audio) and it work perfectly with WDM/KS.

The reason why I'm keep insisting in trying to have A4A running is that the smallest lettency setting I'm able to get which works fine with WDM is 20ms and I'de love to get the 2.5 everyone is talking about and I really like the idea of getting a real access to all of my ins and outs and it looks to me that yours are lot less demanding than WDM and all the other are

Hope this gone help. Continue your good work!
regards

[Michael Tippach]

Please try this:

www.asio4all.com/A4Av24p2.exe

[futz]

Same results with 2.4pre as with 2.3.1, and same as the Typhonj above, except I use EnergyXT. It just locks up immediately upon entering the setup screen.

Back to v2.2, which works just fine.

[Michael Tippach]

Are you sure you are using the _latest_ test version - released about one hour ago? The link does not refer to the pre-release from 2 days ago that already you tested negative.

[Typhonj]

Unfortunately Michael, exact same results and it is definitely A4A which makes Sonar not starting because I uninstalled A4A and Sonar started right away without rebooting and of course having the Creative Asio drivers selected by default.

FYI

[futz]

Michael said:

Are you sure you are using the _latest_ test version - released about one hour ago? The link does not refer to the pre-release from 2 days ago that already you tested negative.

You mean the one I just minutes ago downloaded from the thread, "The Sticky SB Live! - Audigy - Thread" in Problems and Solutions? I just installed and tested it. No change.

Off-Line Settings starts no window, tho the process is listed in Task Manager.

EnergyXT works till you start the setup window and change anything. The second you change anything, it locks and has to be killed in Task Manager.

[Kermit]

Yep, confirmed, I installed A4Av24p2.exe, control panel shows in task manager, but does not come up, Cubase cannot start etc. 2.2 was the last working build for me

(btw, soundcard is Audigy 2 zs platinum pro)

[futz]

Guest-futz said:

Same results with 2.4pre as with 2.3.1, and same as the Typhonj above, except I use EnergyXT. It just locks up immediately upon entering the setup screen.

Back to v2.2, which works just fine.

Just tried the final release of v2.4 and it works great. Bug(s) cured! ;D